The handy Frost Protection mode will keep the room temperature above 45°F at all times.
The mounting instructions aren't very thorough.
This powerful Stiebel Eltron CK 15E is capable of warming quite a large bathroom in mere minutes, which indicates genuine German quality. The device is sleek and emits only 49.7 dB of noise, meaning you won't hear it over the sound of the running water. We'd recommend it to anyone seeking quality and longevity in the heater.
Larger than 215 sq. ft.
Adjustable, temperature range 41–86°F
Frost protection setting
18 1/8" x 13 1/4" x 4 3/4"
The body of the heater has no sharp edges so it's safer than most other models for kids and pets. The device is fully compliant with UL safety standards.
The horizontal grille tends to collect dust and hence should be cleaned quite often.
Made in the USA, the Cadet Com-Pak has a stylish design and then some other features making it one of the better offers on the market. With an effective coverage area of 200 square feet, this heater will heat your bathroom as well as adjacent rooms so you won't walk out to the cold. Recommended for those that want a maximum heating coverage.
Up to 200 sq. ft.
Adjustable, temperature range 40–85°F
High-temperature safety shutoff feature
10 1/8" x 8" x 4"
The advantage of this Broan bathroom heater is its ceiling-mounted design, meaning it won't get in your way and will direct heat 360 degrees. Another benefit of this model is that it can be fitted with two more wall controls - 60-min timer or 15-min timer - for greater convenience and functionality.
You'll need to place it right in the center of the ceiling to achieve uniform heating.
If you want a bathroom heater that would not attract attention and could be mounted discreetly, the Broan 157 ceiling heater is your best choice. It's a quiet and sleek fan that generates a sufficient amount of power to warm up to 160 square feet of space.
~160 sq. ft.
11" x 11" x 4"
This is one of the few models that has protection against water splashes and complies with the IP24 waterproof class.
It's a relatively low-power model.
Although we like the New Age Living heater, it's not too powerful and should thus be used for smaller bathrooms with limited space. It's easy to mount thanks to the free bracket and the ultra-slim device will fit easily onto your wall, blending in nicely. If your home isn't too big, this may be a solid choice, especially at such an appealing price.
Up to 120 sq. ft.
Double safety thermal cut-out, IP24 rated water resistance
11" x 13" x 2"
The patented ThermaFlo technology will help you save up to 33% on your electricity bill. The auxiliary outlet on the side panel of the heater will allow you to charge low-wattage devices while you'll take a bath or shower.
The power cord is quite short and may restrict mounting options.
The Seabreeze might not look as cool as its high-end counterparts but it's certainly one of the better options in the budget range. Powerful yet energy-efficient it's ideal for households with bathrooms that aren't bigger than 150 square feet in size.
Up to 150 sq. ft.
Adjustable, 2 heat settings: low and high
9.5" x 8.3" x 4.5"
Stiebel Eltron CK 15E
Efficient Heating for Big Rooms
Heaters are supposed to be designed for convenience, but many models are either easy to trip over or, if they’re wall-mounted, bulky and not too effective. Most of the latter types expel air upwards, sending heat to the ceiling and leaving the floor level cold and unpleasant to your bare feet, especially after the shower. However, unlike them, the Stiebel Eltron CK 15E has a down-draft design, meaning that it pushes heat downwards and warms the space evenly from all sides providing you with a maximum comfort. The best thing is, its effective coverage area makes a whopping 215 square feet which means it can be used not only for your bathroom but for any other room in your house as well.
The Steibel Eltron works in the range of 41-86°F and can be controlled with a built-in thermostat. You can turn it up as much as you like using the knob on the side of the heater and then let it control the temperature automatically. One of the other features worth mentioning is the frost protection setting which allows using this heater in dwellings or rooms where it's necessary to maintain the above freezing temperatures. The thermostat detects temperature drops and adjusts the heat accordingly.
Quiet and Efficient German Wall Heater
Other factors standing the Stiebel Eltron apart from similar models is its modern looking, sleek design and almost whisper-quiet operation. You can be sure that the heater won't affect your bathing experience with the loud humming as it emits only 49 dB, which is no louder than the sound of the running water. For a 1500-W heater, this kind of performance is really quiet.
We’ve already said a few words about the frost protection mode but the advantages of the Stiebel heater do not stop there. One of the other things we'd be remiss not to mention about this heater is that it comes with a built-in booster timer. Using this option, you can run the heater at its maximum for 60 minutes, and when this time goes off, the device will automatically lower the temperature back to the original settings. This will help prevent energy waste as well as allow keeping the room warm.
One thing that did disappoint us a bit is the installation process that seems to be quite complicated. First off, the heater has no cord, which means it has to be hard-wired. Second, due to its down-draft design, it has to be mounted at a distance that has to be compliant with the installation requirements. While we believe most customers should be able to mount this heater themselves, we still wish this process were a bit easier and didn't take as much effort and time.
However, overall the Stiebel Eltron CK 15E doesn't have a lot of flaws and is certainly one of the more effective wall heaters we've come across so far. Which doesn't come as a surprise considering that what we're dealing with is the genuine German quality. So if you aren't the kind that can't be scared off with a price and wish to get the best the market can offer you, the Stiebel CK 15E should be right up your alley.
To Fit Flush With a Wall
One of the best ways to keep your bathroom warm with no cold spots is to use either a wall-mounted heater or a ceiling fan. For this exact purpose, we'd recommend you to consider buying the Cadet CBC103TW which can be mounted both on a wall and on the ceiling, is reliable, and - more importantly - reasonably priced. The advantage of the Cadet CBC103TW over many similar models is that it doesn't require vents to be connected and can be mounted even on those walls that are not fitted with ducts. Another benefit of this heater is that it looks very discreet - the flat front of the heater is so sleek it will fit flush with the wall.
Unlike convection models, the Cadet CBC103TW doesn’t tend to overheat due to it's simpler yet safer system. The fan circulates air, draws in chilly drafts, and gives off warmth. Although the Cadet CBC103TW is relatively small it’s capable of warming up to 200 square feet and we find that the fan works best in medium-sized rooms. So if your bathroom isn't too huge, this heater should suit it perfectly. The Cadet CBC103TW is not too big at just 10 ⅛” by 8” by 4”, though, it does take some space inside the wall, which means you'll need to find a spot with no wiring or piping going through it. That said, the installation of the heater is straightforward and simple and you should be able to accomplish it with no professional help, just follow the instruction manual.
Powerful and Versatile
The Cadet CBC103TW comes with a built-in thermostat, letting you adjust the temperature between 40 and 85°F. As the device consumes a maximum of 1000 watts, we’d advise against running it at the highest setting constantly. Instead, try heating up the room and, once it’s warm enough for you, bring the temperature down to a more reasonable level. That way you'll save money on the electricity bill while still heating your bathroom properly. For user's convenience, the Cadet CBC103TW has a special safety shutoff feature which will kick in to prevent fire hazards, if the heater reaches the edge of its maximum safe temperature. Thanks to this, you will not need to worry if you ever happen to forget to turn the heater off.
Despite the fact that the Cadet CBC103TW can boast very good build quality and efficient performance, there are two shortcomings to it which are worth mentioning. One of them is that the heater has a white finish, which means you'll need to clean it quite often to maintain its nice look. And though cleaning won't take a lot of time, it might still grate on some people after a while. Another one is that the manufacturer hasn't taken care of providing its customers with some specific numbers regarding the noise levels of the heater. Though you're unlikely to find many negative comments in that regard, it'd still be nice to have some specs to be able to compare.
Now, with the complaints being out of the way, we can still safely recommend the Cadet CBC103TW heater to the kind of people who are looking to buy a compact, versatile and efficient device to install in the bathroom. While not offering a lot of bells and whistles, this model is still one of the favorite choices of customers who value sleek design solutions and American quality.
If you'd like your bathroom to be evenly warmed from all sides, it's best to install a ceiling-type heating device. Having searched through a huge number of ceiling heaters, we couldn't find a better model than the Broan 157. The benefits of this heater are that it's very effective and that it's easy to mount. You can attach it to any standard 3 ½ or 4-inch round electrical box or a 4 inch octagonal one with minimum effort. For more uniform heat distribution, it's recommended to install it right in the center of the ceiling, however, you may want to avoid placing it directly above the tub since this may lead to creating a hot zone and making your bathtime less comfortable.
If you worry that installing a heater on the ceiling might spoil the interior of your bathroom, worry not as the Broan 157 has a very sleek design and extends only 2 ¾ inches from the surface. It will not attract too much of attention and you'll soon forget it's there at all, even if you have rather low ceilings or white-tiled bathroom.
Though the Broan 157 heater doesn't have any controls except for "on/off" option, the manufacturer allows you to equip it with a thermostat and a timer additionally, which makes it suited even for demanding users.
Insights into Tech Specs
Despite being rather modestly-sized, the Broan 157 is surprisingly powerful and can deliver up to 1250 Watts of heat under 10 minutes. This brings it on par with some of the bulkier models that are designed to heat huge spaces. Still, as we've said, it's a shame that it's not possible to adjust its heat flow without having to buy a thermostat separately since the efficiency of the heater is worth the whistle.
However, we are quite happy with how the Broan 157 is built and one of our favorite features is the lubricated motor which keeps the fan running smoothly. This, along with the automatic overheat protection, makes this heater safe to use and guarantees no damage or fire hazards. So even if you leave it running for the whole day, you will not have to worry.
Of course, the Broan 157 isn't totally flawless and seems to be missing some of the important functions, however, it's still one of the few models we'd suggest you buy, especially if you want something small and quiet. Moreover, you can fit it with both a thermostat and a timer additionally at any time when you decide that you need it.
New Age Living Phantom 4
The New-Age Bathroom Heater
Wall heaters are an effective way to warm up a bathroom but not everybody has enough space for a bulky model that takes half the wall. If you're one of those people, we'd recommend you to turn your attention to the New Age Living Phantom 4. This off-white sleek wall model is very compact and won't take much space. Besides, it doesn't require a lot of maintenance and is very easy to install. The heater comes pre-assembled and includes everything needed for its quick mounting.
Designed for moderate-sized bathrooms, the New Age Living Phantom 4 is the type of heater that can help reduce your electricity bills by 50% by warming up only the space you're going to use. So even though it doesn't disperse as much heat as some other models from this review, it can effectively warm up to 120 square feet of space, which is the average bathroom size for most dwellings. All of that has been achieved thanks to the high-quality heating element within which the heat is generated inside the heater and the innovative natural resource heating technology that boosts the output of heat without using too much electricity.
Water-Resistant for Maximum Safety
Even though the New Age Living Phantom 4 is one of the more basic heaters out there, it has quite a few handy features making its use convenient. One of them is a built-in thermostat allowing you to adjust air temperature with a maximum comfort. Another one is the location of the control buttons on the right side of the device where it's easy to reach them and they do not heat up. The last but not the least feature is the IP24 water resistance making it safe to install it in bathrooms and rooms with high humidity levels. In addition to the mentioned features, the New Age Living Phantom 4 has an automatic shutdown function which engages if the model overheats.
We should also mention that because some of the heat is released through the front of the heater it's not recommended to place it behind the furniture and definitely not close to the tub or shower. Try to mount it at least 2 or 3 feet away from any objects. Thanks to the overall dimensions of the heater making 11 x 13 x 2 inches you shouldn't have trouble finding a spot for it.
Summarizing, if you look for an affordable and reasonably powerful model that will generate enough heat to warm medium-sized spaces and will also be safe to use in bathrooms, the New Age Living Phantom 4 can be your best bet.
A Cost-Efficient Wall Heater
If you need to keep your bathroom warm but don’t want to spend too much, you’ve come to the right place. We’ve picked out an affordable bathroom heater with a thermostat which despite its considerably lower price doesn't trail behind its more pricey counterparts. With a maximum energy level of 1500 Watts, the Seabreeze SF12S generates a sufficient amount of power to heat small- to moderate-sized bathrooms and produces little to none humming noise to ensure that you can enjoy your bathtime in the quiet. The fan uses ThermaFlo technology which activates the heater when the temperature in the room drops to a certain level. This helps save up to 33% of energy while allowing you to maintain your bathroom comfortably warm.
And don’t worry about the device being on for too long as it has overheat protection that stops the fan when it starts to get excessively heated. If you feel like the device is running too hot but the automatic shutdown hasn’t kicked in, the manual reset is available, which overrides all other functions and lets you turn the heater off at any point. Plus, the device will cut power automatically if it tips over, though that’s certainly not a very likely scenario. In any case, an ounce of prevention is worth a pound of cure and the Seabreeze SF12S certainly has plenty of preventive measures to keep the heater running safely.
Brilliant in Its Simplicity
We’re pretty happy with how easy the Seabreeze SF12S is to put up on the wall as it comes with a free mounting bracket that fits freely over any power socket. Once you hang it up you'll feel an instantaneous heat spread around your whole bathroom. And we do mean the whole bathroom as the effective coverage area of the Seabreeze heating device is 150 square feet which is usually more than enough for an average home, unless, of course, you live in a mansion. But if you do, you'd probably splurge on a heater with some fancy features like a built-in foot massager and a cocktail maker, rather than investing in something as basic as the Seabreeze SF12S.
Speaking of basic, the thermostat in the Seabreeze SF12S has only 2 temperature settings: high and low. But let us be honest, unless you are too sensitive to temperatures and can tell the difference between, say, 55 degrees and 60 degrees, that's all you really will need.
While the Seabreeze SF12S isn't one of the most modern-looking and stylish heaters, it has a practical compact design at 9.5” x 8.3” x 4.5” dimensions which allows you to install it pretty much everywhere in your house.
To sum up, we'd definitely advise adding the Seabreeze SF12S to your wishlist if you want an affordable bathroom heather that will be cost-effective, have a built-in thermostat and provide a solid heat coverage. While not the most swanky or high-capacity, this model is certainly a bargain at this price.
What Is a Bathroom Heater?
While winter is coming to an end, the chill might still keep hanging in the air for quite a long while, making it difficult to walk out of the hot shower in the mornings. However, you can make your life a bit easier by setting a small bathroom heater. A bathroom heater is a simple appliance that can maintain a comfortable temperature while keeping cold drafts at bay. What differs bathroom heaters from residential heaters is that the former ones are allowed to be used in places with high humidity levels due to their water-resistant design. In all other respects, they look and work in the same way. For this review, we've picked some of the best heaters that you can use in your bathroom to keep the room warm and prolong the enjoyment of your bathing experience. Read and compare their advantages to get the one that will totally meet your demands.
You can also add some heat to your living room by installing an electric fireplace. These classy-looking devices will not only keep you warm but also embellish your place bringing functionality and style to its decor. And if you'd like to maintain your house warm while keeping electricity bills sensible, you should definitely look towards buying a thermostat.
What Features to Compare
When selecting a bathroom heater, you'll need to choose between two types: those that use convention technology and those that come with fans. However, let's not dive into the technical details and just say that your choice will depend on what type of heat or warmth you prefer. Fan (or radiant) heaters are best for concentrated warmth aimed at a single spot while convection models are used primarily for filling rooms with sustained heat. Thus, fans will work better if what you want is to keep your bathroom warm only for a short period of time while soaking in a bath, for example, while convection models will suit those who'd like to maintain the warmth longer.
Most people think of heating devices as of these small boxes that you put on the floor and then try hard to not trip over. However, many models can actually be placed on a wall or even mounted on the ceiling. This allows you to free up some space as well as makes the device less of an eyesore, and, if you prefer bathroom ceiling heaters, also helps distribute the airflow more evenly around the room. Of course, a wall-mounted model is more difficult to service and clean but the convenience might be just worth it.
With this parameter, you have to take into account just how spacious your bathroom is. If you have a tiny room with a shower and a sink, you don’t really need a heater that can cover an area equal to a football field. However, a bigger room requires a more powerful appliance. Plus, don’t forget about the possibility of warm air leaking out through windows, vents, and doors. Account for that and make sure that your heater's maximum coverage area is a bit larger than your bathroom.
It’s pretty self-explanatory: the more powerful your heater is, the faster it works. If you have an average-sized bathroom, you need a mid-range power capacity, anything around a 1000 W is acceptable. Of course, a weaker device can heat this space as well but it’s going to take longer and, in the end, cost more.
This may seem like a no-brainer: the more temperature settings you have the better, right? Well, in reality, you’re likely to use only a couple of them with the rest only gouging the price. We recommend getting a model with a thermostat that has a reasonable temperature range. You won’t have any use for 110°F unless you want your bathroom to feel like a desert. Conversely, anything below 35°F is just not practical. A range of 35-85°F will be more than enough.
Any electrical appliance should be safe to use but that goes double for heaters as a bit of faulty wiring can become a serious fire hazard in a device of this kind. Whether it’s an overheat protection mode or an automatic shutoff or even a special waterproof casing, any feature of this kind is a bonus and should be weighed as you consider the purchase.
Last but not least, make sure that your floor-standing heating device isn’t too big so you won’t trip on it or, if it’s a bathroom wall heater, that it doesn’t take up half the room. Don’t be fooled into thinking that bigger means better, even a smaller model can work efficiently and provide warmth to a spacious room.
Did you know?
So you’re laying back, enjoying the warmth coming from your space heater and loving life. But have you wondered when that luxury became available to people? Surely, a convenience as basic as a warm home should have emerged a while ago. Well, let’s take a little dip into the history of heating.
The Early Luxuries of Heat
The standard of living in Ancient Greece might not have been too swanky but scientists have discovered central hearths and, upon further study, dated them around 2500 B.C. They are considered to be one of the first forms of home heating, succeeded by basic ovens in Turkey in 1300 B.C. Of course, these appliances bear little resemblance to the modern systems though they were relatively efficient, especially considering how long ago they appeared.
Fireplaces began to pop up in the more well-off household around 800 A.D., spreading steadily all over the world. By the time the 13th century rolled around, castles and homes of the rich all had fireplaces with crude chimneys built. They stopped being a luxury and turned into a mundane convenience, though the poor and the peasants certainly had a different view still relying on the most basic means of keeping their houses warm. Most of them had to huddle in front of brick stoves, though the old models were so large that you could probably hold a family gathering around them.
Warmth Is in the Air
Of course, we are more familiar with heating homes by using air, whether via your AC unit or a fan heater or some other appliances. This method was first recorded around 200 A.D. but the evidence is inconclusive, especially as the system seems to show little progress between that date and the later reappearance of the air-heating devices.
Solid records are available from the eleventh century when a European city hall used furnaces emitting heat into the air to stay warm. They connected each furnace to a chamber using ducts with covers so the flow of heat was easy to adjust.
Over the next few centuries, the air-heating systems persisted and even achieved some progress, though it was stalled by stove-makers trying to keep their profits high and expenses low. In fact, proper advancements consisted mostly of recycling cool air or finding new ways to improve the funnels that guided the heat into rooms. Eventually, water-heating took hold, further impeding the progress in this industry. While fans appeared and space heaters were invented eventually, one can’t help but wonder how much faster we would have had the luxury of this personal heating if the progress wasn’t halted by unfortunate turns of events.
Back to the Present
Nowadays, of course, we have convection and radiate heaters, circulating air and warming our homes in addition to the basic heating systems. However, even with all this convenience on hand, many still find that the best way to stay warm is to cuddle with someone you love, be it a spouse or a pet. We hope our heater review helps you find the best device to keep your bathroom cozy and that you’ll always have someone helping you get warm on cold winter days!
Q: Let’s say I’ve accidentally splashed some water on my heating device, what should I do? Is it completely ruined or will it be fine? Perhaps my model has waterproofing?
A: First, it is of the utmost importance that you turn the appliance off as soon as possible. Shut the power off and see if there’s any smoke coming out of the heater or try to hear whether there are any unusual noises coming from the device. Then, if you have a portable model, pick it up, flip it with the grill side down and see if you can get rid of the water that might have gotten inside. After any moisture leaks out, place the device in a dry place and leave it off for a day or two. If your appliance is wall- or ceiling-mounted, you can simply wait or contact a specialist to check for moisture-induced damage. Either way, when you next start the device, stop and make sure that it’s running properly and isn’t reacting to the water damage in any hazardous ways. Leaving a broken heater on is a fire hazard and even slight water leaks should be taken seriously. Always remember the rules of fire safety.
Q: Is there any way to push the maximum temperature of my heater beyond the factory-set limit? I want to get the room even warmer and the current heating level is simply not enough.
A: We strongly advise against trying to fiddle with the tech, especially one that’s as intricate and potentially dangerous as a space heater. Sure, you might get a couple of extra degrees after modifying some parts of the device but are they worth the risk of fire? Breaking even one component could lead to serious damage to the appliance and, as a result, to your home. Unless your model has some “Boost” setting that maximizes the temperature above the standard level, you get only that level that's specified on the box.
Q: Could I potentially run this all day long? I want to keep the room warm so I won’t have to wait before going to take a shower.
A: It’s certainly possible but that would eat up a lot of power and put considerable strain on the device. If you have a model that’s powerful enough, it would simply be more efficient to run it a couple of minutes before you go run a bath. That way the air will be warmed a bit and you won’t be faced with an insanely high electricity bill. Plus, running heating appliances for too long tends to dry out the air, which could damage your skin, especially after a hot shower. All in all, we definitely recommend turning the heater on only when necessary.
Q: Where should I place my floor-model heater for maximum efficiency? Can I just tuck it away into a corner?
A: If you want the device to spread the heat around the entire room, you need to place it closer to the wall. However, we advise against tucking it into the corner as this can pose a fire hazard if you run the device for a while. And, of course, don’t just place it in the middle of the bathroom as tripping on it wouldn’t be pleasant, especially if you damage the appliance in the process. An optimal spot is somewhere at the back of the room without getting too close to the wall, especially if you have little space to work with.
1. Portable Heaters, Department of Energy.
3. How your heater can kill you, Health24. April 1, 2015.
4. Laurent Belsie Electric heater: Five safety tips for when you turn it on, CSMonitor. December 15, 2010.
5. Jeff Rossen and Anneke Foster How to use a space heater safely, TODAY. December 2, 2017.
6. Lindsay Wilcox Tips on Buying a Space Heater, Overstock.
7. Chris Barnes Home heating guide, Choice. December 20, 2017.