Product Comparison: Kingpin Cooling KPx vs Thermal Grizzly Kryonaut

Advertiser Disclosure

This site is a free online resource that strives to offer helpful content and comparison features to its visitors. Please be advised that the operator of this site accepts advertising compensation from certain companies that appear on the site, and such compensation impacts the location and order in which the companies (and/or their products) are presented, and in some cases may also impact the scoring that is assigned to them. The scoring that appears on this site is determined by the site operator in its sole discretion, and should NOT be relied upon for accuracy purposes. In fact, Company/product listings on this page DO NOT imply endorsement by the site operator. Except as expressly set forth in our Terms of Use, all representations and warranties regarding the information presented on this page are disclaimed. The information which appears on this site is subject to change at any time. More info

General Specifications
Kingpin Cooling
About the product
This non conductive, low resistance thermal grease is designed and validated for a wide range of cpu and gpu overclocking from air cooling, water, dry ice, or all the way down to liquid nitrogen temperatures.
Key Specs
2.9 g/cm3
3.7 g/cm3
Thermal Conductivity
13.8 W/mK
12.5 W/mK
All materials
All materials
170 P
What customers say about "Key Specs"
Kingpin Cooling KPx Thermal Grease 3g
  • The performance of this paste is fine.
  • The thermal compound works exceptionally well.
  • Excellent thermals with this product!
  • This stuff is amazing! 6 degree drop on my temperatures.
  • Difficult to remove. It is like removing silicon.
Thermal Grizzly Kryonaut 1g Thermal Paste
  • The conductivity of thermal transfer of this paste is unlike any other. It is truly superb!
  • I bought this due to the thermal conductivity rating at 12.5 W/mk and the temperature range -250C /+350C.
  • The thermal conductivity of the stuff is amazing, and I did not find any more difficult to apply than other brands. Highly recommended.
  • This stuff is amazing – properly applied, the system now idles at 45° C and hovers around 80° C under full load.
  • I use this on all my builds. It has the best thermal conductivity of any non conductive thermal paste.
0.106 oz.
0.035 oz.
Kit Contents
Syringe with thermal paste, Protective cap, Spreader
Syringe with thermal paste, Protective cap, Spreader
What customers say about "Features"
Kingpin Cooling KPx Thermal Grease 3g
  • The 3 g were just enough to cover my ThreadRipper with a tiny bit left over.
  • Great thermal paste, spreads easy and easy to wipe off accidental contamination of fingers.
  • Included a bonus applicator. Amazing volume.
  • Cheap and good quality. Gets the job done and is non-conductive.
  • The product was dry very dry and couldn't get it on my gpu.
Thermal Grizzly Kryonaut 1g Thermal Paste
  • Great thermal transfer conductivity.
  • Best non-conductive paste currently available.
  • Its non conductive and applies pretty smooth.
  • The tube is extremely small. Enough only for a single application.
  • The material doesn't spread very easily.
Warranty / Certifications
Other Information
12.00 $

Other reviews