Product Comparison: ID-COOLING IS-60 vs Cryorig C7


Advertiser Disclosure
X

This site is a free online resource that strives to offer helpful content and comparison features to its visitors. Please be advised that the operator of this site accepts advertising compensation from certain companies that appear on the site, and such compensation impacts the location and order in which the companies (and/or their products) are presented, and in some cases may also impact the scoring that is assigned to them. The scoring that appears on this site is determined by the site operator in its sole discretion, and should NOT be relied upon for accuracy purposes. In fact, Company/product listings on this page DO NOT imply endorsement by the site operator. Except as expressly set forth in our Terms of Use, all representations and warranties regarding the information presented on this page are disclaimed. The information which appears on this site is subject to change at any time. More info

General Specifications
Brand
ID-COOLING
Cryorig
Model
IS-60
C7
Origin
China
China
About the Product
The IS-60 low-profile CPU cooler is born to fit space limited system like ITX and HTPC system builds. It comes with 6 copper heatpipes, aluminum fins and copper base to bring excellent heat transfer from CPU.
The CRYORIG C7 was designed to be a solution for all cases and PC systems. With a height of 47mm fan included, the C7 fits into almost all aftermarket cases, while packing cooling tech only found on full sized tower coolers.
Key Specs
Cooling Type
Air Cooling
Air Cooling
Max. Airflow
53.6 CFM
40.5 CFM
Number of Pipes
6
4
What customers say about "Key Specs"
ID-COOLING IS-60 Low Profile CPU Cooler
  • It fills up the space perfectly and has better cooling performance than the AMD Wraith Stealth.
  • The CPU cooler is great and exactly what I was looking for if not better than I expected to be honest.
  • This cooler is awesome! The 6 heat pipe heatsink is extremely efficient, It can handle the i7 9700k inside node 202.
  • Very very quiet and silent when running. Great cooling performance.
  • CPU running cooler and quiet and looks good.
Cryorig C7 SFF Mini ITX CPU Heatsink
  • Bought this to cool a 4790k that is in my media pc. Good cooling system.
  • Cools an 8 core / 16 thread processor easily.
  • Its cooling my I7 8700k and it sitting at 65 degrees under load.
  • My R5 1600 is only rated at 65W, so even at load this keeps it nice and cool.
  • It's supporting an Intel i5-4670K overclocked to 4.0GHz with perfect temps that never seem to exceed 60°C even under load.
Size & Weight
Height
2.16 in.
3.81 in.
Width
4.72 in.
3.81 in.
Depth
4.92 in.
1.85 in.
Weight
1.04 lbs.
0.78 lbs.
What customers say about "Size & Weight"
ID-COOLING IS-60 Low Profile CPU Cooler
  • It's a low-profile, high-performance cooler for Mini-ITX installation.
  • Thin, good design and cooling performance.
  • Fit is wonderful in the case. Great size.
  • Great CPU cooler for Node 202 case. Amazing low profile design.
  • Easiest installation I've done for any cpu cooler. Good size and weight.
Cryorig C7 SFF Mini ITX CPU Heatsink
  • I liked this cooler as it was quiet and easily fit into my mini-itx Cooler Master Elite 130 case.
  • Comes with everything you need to get it mounted (nut driver, bracket, and thermal paste) and it will fit in virtually any case.
  • Great super small factor form cpu cooler, it fits many diff cpu setups.
  • This product is amazing. It keeps my cpu cooled and it fit my case perfectly.
  • The back plate will not fit on an Itx Z370-i Motherboard without sawing cut out to fit over the components.
Features
Socket Compatibility
Intel:, 1150, 1151, 1155, 1156, AMD:, AM4, AM3 +, AM3, AM2 +, AM2, FM2+, FM2, FM1
Intel:, 1150, 1151, 1155, 1156, 1200, AMD:, FM1, FM2, FM2+, AM2, AM2 +, AM3, AM3 +, AM4
Speed
1600 RPM
2500 RPM
Cooled CPU (Max. TDP)
130 W
100 W
Noise Level
30.2 dBA
30 dBA
Number of Coolers
1
1
Heat-Exchanger Material
Copper
Copper
Power Connector Type
4-pin
4-pin
Extras
Low Profile Mode, High Density Radiator, Universal Mounting System
Curiously Small, Impressively Cool, Universally Compatible, Zero Interference, Quad Air Inlet System, Acoustic Vibration Absorbers
Bearing Type
High Precision Low Noise (HPLN™) Bearing
What customers say about "Features"
ID-COOLING IS-60 Low Profile CPU Cooler
  • Mounting was not very difficult. The mounting system is similar to the NH-L9. No backplate required, just screws and washers.
  • It’s very quiet with the Noctua fan to the point of being inaudible at idle from about 1.5 meters away.
  • Uses 120 mm, standard mounting, can replace with different fans.
  • Good quality, value for the price. Comes with syringe of paste.
  • I'm surprised how easy it went to install this on my Intel system.
Cryorig C7 SFF Mini ITX CPU Heatsink
  • The fan is surprisingly quiet, and has a nice crosslinked sheath on it.
  • The fan is very quiet, no noise complaints.
  • The fine is whisper quiet compared to the Intel stock cooler.
  • It performs better than the L9i and stock cooler, looks great, and is quiet enough for most people.
  • When it's spinning at 1000rpm, it's really quiet.
Warranty / Certifications
Manufacturer Warranty
1 year(s)
3 year(s)
Certifications
CE
CE
Other Information
Manufacturer


Other reviews