Product Comparison: ARCTIC Freezer 33 eSports Edition vs Cryorig H7


Advertiser Disclosure
X

This site is a free online resource that strives to offer helpful content and comparison features to its visitors. Please be advised that the operator of this site accepts advertising compensation from certain companies that appear on the site, and such compensation impacts the location and order in which the companies (and/or their products) are presented, and in some cases may also impact the scoring that is assigned to them. The scoring that appears on this site is determined by the site operator in its sole discretion, and should NOT be relied upon for accuracy purposes. In fact, Company/product listings on this page DO NOT imply endorsement by the site operator. Except as expressly set forth in our Terms of Use, all representations and warranties regarding the information presented on this page are disclaimed. The information which appears on this site is subject to change at any time. More info

General Specifications
Brand
ARCTIC
Cryorig
Model
Freezer 33 eSports Edition
H7
Origin
China
China
About the Product
Arctic Freezer 33 eSports Edition is a processor cooler with 4 high-performance 4 U-shaped copper heat pipes with a diameter of 6 mm. The maximum cooling capacity of the cooler is 320 watts, it is able to dissipate the heat of massive and expensive Hi-End class processors.
CRYORIG H Series coolers feature our proprietary Hive Fin structure. The design allows for a combination of Jet Fin Acceleration and Turbulence Reduction, as well as strengthening structural strength of the fin stacks. Combined together, the Hive Fin design brings cool innovation.
Key Specs
Cooling Type
Air Cooling
Air Cooling
Max. Airflow
138 CFM
59 CFM
Number of Pipes
4
3
What customers say about "Key Specs"
ARCTIC Freezer 33 eSports Edition Tower CPU Cooler
  • Looks really nice, and is dead silent. Great cooling performance.
  • This saving grace of a product is cheap, quiet, and cools well enough.
  • It cools the processor fine, and the fan is quiet, too.
  • This cooler works well at keeping my 1700x cool and quiet.
  • Amazing for air cooling, and relatively quiet on max speed, and comes with a 10 year warranty.
Cryorig H7 Tower Cooler
  • Not only is this fan quiet, it actually cooled the case down.
  • This fan cools very well. The room I have my desktop gets very hot during the summers and it's hard to keep it cool.
  • The fan also has foam rubber pads to keep the vibration silent. Great cooling type.
  • This is truly an amazing device. It cools my PC very well, went from 120 degrees F sitting at the desktop to 85-90 F while on the desktop.
  • I picked up this cooler and used it in my new gaming build and it seems to cool very well.
Size & Weight
Height
6.18 in.
5.7 in.
Width
4.88 in.
4.83 in.
Depth
4.05 in.
3.85 in.
Weight
1.68 lbs.
1.56 lbs.
What customers say about "Size & Weight"
ARCTIC Freezer 33 eSports Edition Tower CPU Cooler
  • It cools a CPU perfectly. Good size.
  • Was pretty easy to install and cools nicely. Amazing size.
  • An excellent cooler that is very easy to install due to its compact size.
  • Compact enough size with amazing performance.
  • Clearance for the RAM was a little tight.
Cryorig H7 Tower Cooler
  • The cooler is a nice size, dead silent at low RPMs, and the aesthetic design is top notch.
  • Cools very well. It makes very little noise. Great size.
  • It fit well in my case. Really good size and weight. Highly recommend.
  • This fan is rather large, so if you don't have a decent sized case, it may not fit.
  • I dislike is its size. This is a big cooler.
Features
Socket Compatibility
Intel:, 1150, 1151, 1155, 1156, 2011, 2011-3, 2066, AMD:, AM4
Intel:, 1150, 1151, 1155, 1156, 1200, AMD:, FM1, FM2, FM2+, AM2, AM2 +, AM3, AM3 +, AM4
Speed
1800 RPM
1600 RPM
Cooled CPU (Max. TDP)
210 W
140 W
Noise Level
26 dBA
25 dBA
Number of Coolers
2
1
Bearing Type
Fluid Dynamic Bearing
Sleeve
Heat-Exchanger Material
Copper
Copper
Power Connector Type
4-pin
4-pin
Extras
PWM, Direct Contact Heatpipes, P-Fans, Ideal airflow, Easy Installation
Hive Fin, Jet Fin Acceleration, Heatpipe Convex-Align, X-Bar, Turbulence Reduction System
What customers say about "Features"
ARCTIC Freezer 33 eSports Edition Tower CPU Cooler
  • Mounts to your motherboard's stock backplate. Install is as easy as it can get.
  • The tower looks great. The matte black looks excellent.
  • The heat pipes are spaced among the fins and the fins also have a closed wall on either side which directs the air through the tower better.
  • Easy to install, quiet fans, looks cool, too.
  • I have it mounted on a Ryzen 2400g that's cpu and gpu overclocked, and it keeps things nice and cool. Very happy with the looks and performance.
Cryorig H7 Tower Cooler
  • Installation is fairly easy. It took me a little longer because I didn't want to take my PC apart and put it back together from scratch so I had to work around my other parts.
  • Fits nice and tight as long as u install the backplate correctly.
  • Comes with thermal paste which is a big plus.
  • Easy to mount with screw keepers in the AMD configuration.
  • The 120mm fan keeps things quiet, and is 4 pin compatible.
Warranty / Certifications
Manufacturer Warranty
10 year(s)
3 year(s)
Certifications
CE
CE
Other Information
Manufacturer


Other reviews