Best Nitrogen Regulators

Review & Comparison, Last Update May 29, 2019
A nitrogen regulator is a control valve you place on top of a gas tank. Argon, helium, as well as other inert gas tanks, are a common sight in almost any repair shop or construction site. In order to control the pressure of the gas system, you will need a reliable pressure controller. In this review, you'll find some of the best nitrogen tank regulators that will help you bring your projects to life. ...Read more ...Read less
BEST 2019
PROS
CONS
OUR VERDICT
Type
Delivery Pressure
Gauge Size
Connection
Warranty
 
PROS

A brass T-handle with stainless steel pressure screw allows changing the gas pressure with ease and without any hiccups. It can also be used to quickly shut the gas flow without any wear damage. 

CONS

The gear that operates under high gas pressure has to be precisely connected to the regulator.

OUR VERDICT

A simple yet highly reliable nitrogen controller, the Uniweld RHP800 embodies everything that a good gas regulator is supposed to be. Effective at any range from 0 to 800 PSI, it is a universal model for most gas systems and gas tanks.

detailed parameters
Type

Nitrogen regulator

Delivery Pressure

0-800 PSI

Gauge Size

2" easy-to-read gauges with protective rubber boots

Connection

1/4" male flare outlet

Warranty

Amazon's 30-day return policy

PROS

A couple of easy-to-read gauges provide a precise, convenient, and quick way to monitor the changes in the gas system.

CONS

The gauge might distort the actual minimal gas pressure if the device is not connected properly.

OUR VERDICT

This nitrogen controller from Turbo Torch will come in handy in both HVAC systems and regular welding with standard gas tanks. Additionally, a special protective rubber padding on the valves will provide an extra layer of protection.

detailed parameters
Type

Nitrogen regulator

Delivery Pressure

0-500 PSI 

Gauge Size

2" easy-to-read gauges

Connection

1/4" male flare outlet

Warranty

Amazon's 30-day return policy

PROS

A protective rubber padding on the valves significantly prolongs the service life of the device.

CONS

The housing is prone to scratches. 

OUR VERDICT

The RHP400 regulator from Uniweld is capable of delivering a steady gas flow and maintaining it at the same level. What is more, the gas controller is optionally available in 2 and 5 packs.

detailed parameters
Type

Nitrogen regulator

Delivery Pressure

0-400 PSI

Gauge Size

2" easy-to-read gauges with protective rubber boots

Connection

1/4" male flare outlet

Warranty

Amazon's 30-day return policy

PROS

A porous metal inlet filter has an increased gas flow capacity compared to other similar regulators, which makes it last longer than standard models.

CONS

The device requires extra force applied to the handle to turn it when the gas pressure is high.

OUR VERDICT

Despite its modest size, this regulator model boasts really high delivery pressure. A solid body of the controller makes it durable and reliable, while the brass makes it resistant to corrosion. These aspects make it a great pick for people that need a high-performing gas flow controller.

detailed parameters
Type

Nitrogen regulator

Delivery Pressure

0-400 PSI

Gauge Size

2" easy-to-read gauges with protective rubber boots

Connection

1/4" male flare outlet

Warranty

Amazon's 30-day return policy

PROS

An additional gas valve protects the unit from excessive gas pressure rates, all while displaying correct rates even at 50 PSIG and above.

CONS

The glass meter is a little fragile, so you'll have to be careful with it.

OUR VERDICT

NFM-TT from Turbo Torch is designed to operate in both complex and standard gas systems that already have a pressure controller on board. To add more, the 7/16" - 20" male flare makes it compatible with pretty much every known gas regulator out there. An essential gas flow monitor that will make working with gas an easy task.

detailed parameters
Type

Nitrogen flow meter

Delivery Pressure

50 PSIG

Gauge Size

Vertical gauge

Connection

1/4" male flare outlet

Warranty

Amazon's 30-day return policy

Uniweld RHP800

The One You Can't Go Without

Proudly made in USA, the Uniweld RHP800 is one of the sturdiest and most reliable gas pressure controllers on the market. But what is it about this model that makes it so distinct? A couple of things, actually. First of all, the double-stage valve mechanism of the RHP800 makes it easier to control the gas flow through the system while the nitrogen regulator is connected. On top of that, the high-contrast 2-inch gauges of this double-stage regulator are quite easy to read, even when the lighting and access to the outlet are limited.

As for the specifications of the device, the maximum delivery pressure can reach 800 PSI before it becomes unstable. Thus, it is recommended to use the regulator with systems that operate at 650-750 PSI. The brass pistons of the diaphragm are perfect for air conditioning, refrigerator systems, as well as for pressure testing. What's more, the brass T-shaped handle makes it easier to control the gas pressure without any sudden hikes that can potentially damage the gas system. Lastly, the pressure controller is protected by special rubber gauge boots that prevent the gauges from bending.

Strong, accurate, and extremely reliable, these are the core aspects that make Uniweld RHP800 one of the top gas control devices available on the market today.

Review of Uniweld RHP800 Nitrogen Regulator with 0-800 PSI Delivery Pressure

 

TurboTorch 0386-0814

Keep the Pressure Under Control

The gauge range of the 0386-0814 TurboTorch gas regulator fluctuates between 0 and 4000 PSIG. Although its maximum delivery range is only 500 PSI, it still can be used on nitrogen bottles with the pressure of almost 2000 PSI, as long as the gas is dry and clean.

Designed for complex systems, this nitrogen regulator from TurboTorch is capable of nitrogen purging, an essential detail when it comes to removing hazardous volatile substances from both industrial and regular gas structures. Additionally, this model can be used for pressure testing of the HVAC systems. As we already mentioned, if the gas is dry, you can use the nitrogen to kill all moisture within the system.

The installation of the regulator takes just a few minutes and is similar to any gas welding cylinder setup. In order to make the process as smooth as possible, we recommend checking both the gas cylinder and the pressure controller for leaks.

Contrary to other pressure control products in the same price range, this regulator from TurboTorch is made of steel. That makes it highly resistant to premature corrosion and mechanical damage.

All things considered, this nitrogen tank regulator from Turbo Torch is your go-to solution if you have a gas system with medium to high PSI rates or a large number of inert gas tanks.

Review of TurboTorch 0386-0814 Nitrogen Regulator with 0-500 PSI Delivery Pressure

Additional Info

User Manual     Manufacturer


 

Uniweld RHP400

An Affordable Pressure Controller

The RHP400 has all it takes to be a great pressure controller for almost any system that utilizes gas. Unlike similar models from the Uniweld company, though, this one has relatively weak gauges that may get loose over time if you do not properly connect the regulator to the gas cylinder. Alternatively, this can happen if the pressure inside the nitrogen bottle was too high when the cylinder was connected.

With that in mind, it is important to connect the regulator to the cylinder that is clean and not contaminated with oil. To prevent the gas from leaking out, we recommend checking the gas valves for leaks by spraying water on them.

Despite this minor flaw, the RHP400 model is still one of the top budget models out there, mostly thanks to the solid brass build and additional rubber protection that provides an extra layer of defense to the gauges.

Speaking of gauges, the maximum inlet pressure of the regulator is 400 PSI, which is more than enough for domestic gas systems and HVACs. Additionally, the unit can be used with CO2 on top of the low-pressure nitrogen.

All in all, the RHP400 model is a great budget-friendly option if you need to put a couple of regulator units on gas cylinders but don’t want to break the bank at the same time. Affordable, reliable, and extremely durable, this device is the best nitrogen regulator in its price range.

Review of Uniweld RHP400 Nitrogen Regulator with 0-400 PSI Delivery Pressure

 

SÜA SMP400

Built to Last

This model from SÜA has all the standard features of an ordinary pressure controller. On top of that, however, it also has a few things that make the model stand out from the regulator crowd.

While the maximum delivery pressure rate of the SMP400 is 400 PSI, more than enough for most HVAC systems, you can still use this gas pressure controller for pressure testing and nitrogen purging.

A solid brass construction allows using this model with various gases such as helium, argon, and nitrogen, as well as with other inert gas tanks. The CGA-580 connector can be fitted on virtually any gas tank. That makes this model a highly versatile pressure regulator.

Metal parts aside, the gauges are reinforced with rubber paddings that protect them from harmful conditions and temperatures. With these rubber protectors on, you can use the regulator both indoors and outdoors without too much of a hassle.

The only real issue with the regulator itself is the control handle that requires quite a bit of force applied to it. This is more apparent when the pressure that goes through the valves is reaching 400 PSI and above. That's why we don't recommend using this pressure controller at gas pressure rates of 600 PSI and higher.

To wrap things up, the great quality of build, versatility, and sturdiness easily make the SÜA SMP400 one of the best nitrogen regulators in its class.

Review of SÜA SMP400 Nitrogen / Inert Gas Regulator 0-400 PSIG

 

Turbo Torch 0386-0849

An Essential Gas Flow Monitor

The NFM-TT from Turbo Torch is a good example of an essential part of gas equipment, especially if you use gas-powered devices that require a stable gas pressure. The model can be used with welding devices for controlling the CO2 flow as well as inert gases.

Built to monitor the flow of the gases through the system, the nitrogen flow meters are not meant to be used as pressure controllers. Instead, the Turbo Torch NFM-TT can be connected to an existing gas system to detect any changes in the tension of the gas that flows through the hoses.

It isn't a perfect product but, as far as we can tell, this model only struggles with a low pressure of gas flow rates. It's not a huge problem but the gauges may take some time to show the current pressure level at around 0-50 PSI. Other than this small inconvenience, this flow meter is quite reliable when it comes to showing the correct pressure rate at PSI levels of 50 and above.

In the end, Turbo Torch has proved that they are capable of producing high-quality metal devices for gas systems at a relatively low price. However, despite the modest price tag, the NFM-TT is a reliable device in terms of measuring the pressure of the gas flow in both complex and simple systems.

Review of Turbo Torch 0386-0849 NFM-TT Nitrogen Flow Meter

Additional Info

User Manual     Manufacturer


 

What Is a Nitrogen Regulator?

Although there are quite a few different configurations of gas regulators available on the market, the models that regulate the pressure of nitrogen and other inert gases are usually double-stage regulators. These models are capable of reducing the pressure inside gas systems thanks to two valves used at the same time. The combination of the valves used in these regulators prevents the excessive pressure that can occur during the transition of gas through the system from damaging the valves and gas hoses.

A mass flow controller, on the other hand, is responsible for measuring the flow of the liquids and gases through the system and is usually connected to the inlet end of the gas cylinder after the regulator. These devices are extremely useful for welding and in a complex of more sophisticated gas systems that require a precise gas pressure level.

Once you pick the best nitrogen regulator, we also recommend taking a closer look at plasma cutters if you often work with various metals. In addition, it is never a bad idea to check for gas leaks, so a gas detector or two may also come in handy.

Other reviews
Comments
0 Comments

Your comment was successfully sent

Error! Please try again later

Publish Date: 2019-01-28 15:33:11