1 gallon of the formula can effectively cover 300-400 square feet, which makes this model a good, cost-effective product when you need to clean a large building.
Really toxic, so handle and apply with care, wearing protective gear.
The mold killer from EcoClean Solution is, perhaps, one of the strongest chemical formulas available for sale on the market. Although it is undoubtedly toxic, it does the job better than most products, which is great when killing mold is your top priority and you expect nothing less.
All surfaces, including wood, concrete, tile, and more
No-scrub, Industrial-grade formula
A few minutes
other sizes are optionally available
The spray is easy to apply, owing to the reliable trigger on the sprayer nozzle. The formula, on the other hand, starts dissolving the stains in under 15 seconds, so you won't be wasting any time.
Leaves behind a noticeable smell of chemicals for a few days after application.
The RMR-86 mold cleaning solution from RMR Brands is suitable for indoor and outdoor use. It can be used on various surfaces from wood, metal, and copper to aluminum and ceramics, which makes it a good middle-ground solution for mildew removal.
Bathtubs, decks, wood, shower walls, concrete, brick surfaces, kitchen and bathroom tiles, and similar surfaces
No-scrub, commercial‐grade formula
other sizes are optionally available
This spray can effectively kill not only mold but also up to 99.9% of common bacteria, which makes it a go-to option for use in bathrooms and kitchens.
The plastic seal is somewhat tricky to open.
Despite the fact that this chemical solution mostly consists of bleach, it gets the job done. Thanks to the high-quality trigger assembly on the nozzle, the spray can be effectively distributed over wide areas including walls and ceilings with relative ease.
Glazed and unglazed ceramic tile, grout, vinyl, fiberglass, and plastic
No-scrub formula, contains Clorox bleach additives
16 oz (Pack of 2)
Convenient and simple, the little gel bottle has a small nozzle with a cap. Thanks to this, you can spread the gel accurately and evenly.
It takes quite a while for the gel to start working.
The home mold cleaner from Skylarlife is a highly-concentrated gel that is designed to effectively remove any algae, mildew, and mold from the hardest spots that cannot be reached using liquid formulas. An ideal product for use on bathroom and kitchen tiles.
Tiles, grout, sealant, bath, sinks, showers
Powerful commercial-grade concentrated formula
While other formulas only kill mold, this spray also creates a thin protective layer that negates any chances of mildew and algae appearing in the long run.
Requires rubbing in when it comes to cleaning tougher stains.
This particular mold removing spray from Home Armor is an all-around good solution for killing mold around the house. Effective at removing mold for good, the chemical formula also has a shiner effect to it, which makes it good for use on metal and glossy bathroom tiles.
Aluminum, glass, fiberglass, stone (except marble), cultured marble, acrylic PVC, vinyl, porcelain, rubber, chrome, plastic, Formica, and more
Powerful commercial-grade bleach-free formula
A few seconds
EcoClean Solutions Mold, Mildew & Algae
The EcoClean Solutions stain remover is not exactly what you can call a conventional mold killer. Instead of regular, weaker solutions, this bottle contains an industrial-grade formula.
To start off, owing to the special non-scrub formula, this mildew remover removes any residue, including mold and algae in just a few minutes after the first application. As for the range of application, the spray can be used with wood, concrete, ceramic tiles, and many other surfaces. With that in mind, this package is ideal for both exterior and interior use, including walls and floors in your bathroom, garage, basement, and even the roof.
Although we are reviewing the standard 128-oz bottle here, other sizes are optionally available too, including a 4-gal bottle for bigger tasks and a smaller 32-oz can for more delicate jobs. For your convenience, all these bottles come equipped with a sprayer nozzle so all you have to worry about is wearing proper gear while spraying the liquid solution.
In the end, if you're on the fence about how to approach the task of killing mold in your house, this big white bottle will be an excellent solution to both mildew and algae issues. Fairly easy in application and requiring minimum chemical protection, it deals with organic stains with ease to match.
RMR Brands RMR-86
A Stain Cleaner That Leaves Mold No Chance
Designed for small-scale applications, the RMR-86 patented formula from RMR Brands is a strong yet somewhat weaker mold killer compared to industrial-grade products. That said, it doesn’t mean that this spray cannot remove mildew or black mold, it means exactly the opposite.
First things first, the application time of this liquid takes only a few seconds, which puts it among the best mold remover formulas available on the market today, and that’s no small feat. After you spray mildew or algae stains with this stain remover, it usually takes up to 15-20 seconds before the chemicals start dissolving the annoying black and other colorful spots you’d wish never to come across.
As for the versatility of the formula and the surfaces suitable for the application of the spray, it doesn’t just end at concrete and ceramics. With this 32 oz bottle, you can effectively clean decks, wood panels, shower walls, kitchen tiles, as well as bathroom ones.
Finally, the RMR-86 mold cleaner will be a good solution for people that don’t want to bother with mold for hours on end. Thanks to its no-scrub capabilities and effective chemical formula, it is by far one of the best picks for killing mold quick and with little to no effort.
A Bleach-Based Formula That Kills Mold With Ease
It is widely known that bleach is one of the worst enemies of mold and algae. While not as effective on its own, with some chemical additives and a strong Clorox base, this formula from Tilex is a good alternative for users that don’t want to use strong chemicals in their house.
The small (compared to other products on our list) 16-oz bottle will take care of common mold and mildew, algae, as well as black mold in your bathroom, kitchen, or basement. And even though a single bottle won’t cover a large area, fortunately, this package comes equipped with two of them. While it is fairly simple in application, the actual formula may take some time before starting to dissolve the organic matter of mold. So, it is important to keep that in mind, in case you are looking for instant results.
This package will accommodate your needs if you are looking for a milder chemical-based mold remover. The easy application process in combination with a relatively smaller bottle makes it easier to wield even in one hand and doesn’t need any over-the-top protection. And all in all, it is definitely a must-have option for smaller apartments and houses that have damp spots where mold is prone to appear sooner or later.
Skylarlife Home Mold & Mildew Remover
For Tougher Stains
The main reason why mold occurs in the house is excess humidity as well as poorly ventilated rooms. Although sprays are good at killing the end result of mold - black and green spots on tiles and walls, they don’t actually remove it completely in most cases.
Fortunately, there are cleaning products in the form of a gel, and this gel stick from Skylarlife is a good example of how to make a mold remover right. But what features make it really stand out, though? Let’s take a closer look at this 5 oz package and find out.
Where sprays simply cannot reach due to their liquid nature, the Skylarlife gel soaks in and gradually removes any mold. These spots include but are not limited to: tiles, seals (windows. sinks, baths, pools), as well as showerheads and similar metal parts. While it takes a while for the gel to soak in, in about 6-8 hours, you can simply wash it away alongside with all the mold that may have left underneath.
Wrapping things up, if you want mildew, algae, and mold gone for good, this gel from Skylarlife is the safest bet out there. Though small, this tiny gel pack has a long-lasting effect on all naturally occurring spots in your bathroom, kitchen, roof, or basement and it works especially great on tiles.
Home Armor Mildew Stain Remover
Quickest Way to Get Rid of Mold
Want your bathroom or kitchen clean and free of black, green, or even red mold? Back in the day, you could call a cleaning company that will clean it for you but, unfortunately, their services are quite pricey today. Luckily, there’s another way.
The mold remover from Home Armor and, in this case, a stain remover as well, is an easy-to-use spray that kills the majority of known mold species. Free of bleach, the formula not only kills the mold but also polishes the metal and glossy tile surfaces, which is a nice addition to the package.
When it comes to the actual application of the spray, it already features a sprayer nozzle, so the only thing that you should do is to wear protective gloves. Once applied, it takes just a few seconds for the formula to start working. In under 5 seconds, it kills black mold. Moreover, it only takes just a few moments to kill regular green mold and mildew.
Even though its chemical strength is substantially lower than that of industrial-grade cleaning products, this formula does a great job of removing mold effectively and relatively quickly. Combined with the modest price, it is by far one of the best budget-friendly mold and stain removers available on the market today.
What Are Mold Removers?
Mold remediation services are quite expensive nowadays, and why spend funds on something you could do in just a few days on your own? With little theoretical knowledge and some practice, you can successfully kill mold in your house and even prevent it from occurring ever again.
Since consumer- and industrial-grade mold remover solutions are quite toxic, it is recommended to use them while wearing gloves and other protective equipment such as goggles or full-face masks. Be it indoor or outdoor application, it is better to wear all the protective gear you need to avoid the cleaner from getting onto your skin.
As for the variety, more often than not, your common mold cleaning solution will come in the form of a spray. But if you need a slightly stronger option that is capable of removing the mold completely even from sealants and in hard-to-reach spots, you should get a gel. While the former is good at cleaning the surface, the latter soaks in deep in-between the cracks and annihilates the mold from within.
If you need something more delicate to clean your carpet, rug, or upholstery, we highly recommend getting a high-quality carpet stain remover. Likewise, to fight the everyday messes that are just bound to happen, it is never a bad idea to have a regular stain remover as well.