Best Bottle Jacks

Review & Comparison, Last Update September 12, 2018
No garage is complete without some tools for maintenance as your car needs attention all the time. So go ahead and read our review of the best bottle jack models to find out which instrument is the right one for heavy duty vehicle work. ...Read more ...Read less
BEST 2018
PROS
CONS
OUR VERDICT
Operation
Max Load
Lifting Range
Extras
Weight
Warranty
 
PROS

The air hose is 4 feet long and flexible so you'll have no issues hooking up the jack to an air pump.

CONS

The tool is quite heavy and tough to move around.

OUR VERDICT

If you've got a bigger than average vehicle, this jack with its 40,000 lbs max load will be an indispensable tool for your garage. It has an automatic pump lift to make work easier and the body of the jack is very sturdy, ensuring its long service life. A great choice for owners of big rigs.

detailed parameters
Operation

Manual or pneumatic

Max Load

40 000 lbs

(Also available: 24 000 lbs)

Lifting Range

10.3" to 20.1"

Extras

Hardened alloy-plated ram, air valve with integrated filter, carrying handle, 2-piece lifting handle

Weight

32 lbs

Warranty

1 year

PROS

The spots that usually bear the bulk of weight are reinforced to prevent damage.

CONS

The handle is too short for use under a vehicle.

OUR VERDICT

Those that want their jack to have a broad lifting range will find a lot to like about this model. That's coupled with pretty high max load so you know for sure this tool is ready for heavy duty use. A fine choice for your average car, especially ones with high clearance.

detailed parameters
Operation

Manual

Max Load

24 000 lbs

(Also available: 12 000 lbs, 40 000 lbs)

Lifting Range

9.5" to 18.9"

Extras

Built-in bypass system to protect against ram over-travel, heat-treated critical stress areas, carrying handle, 2-piece lifting handle

Weight

17.7 lbs

Warranty

3 months

PROS

The square foundation guarantees the jack will stay steady and won't skid on any type of surface.

CONS

Some users say that the release valve is placed in a hard-to-reach spot.

OUR VERDICT

Those concerned about safety will appreciate this non-skid jack that will remain steady as a rock no matter what you're working on. It doesn't have the highest max load but the lifting range is quite broad and the device is reliable, if a bit tough to control. If you want a high-quality product without spending too much, this jack is a fine pick.

detailed parameters
Operation

Manual

Max Load

6 000 lbs

(Also available: 4 000 lbs)

Lifting Range

11.5" to 21.5"

Extras

Patented 2-in-1 design, safety bar, 2-piece lifting handle

Weight

22.2 lbs

Warranty

1 year

PROS

The ram moves extra smoothly and the steel lifting saddle is plus-size for more careful car cradling.

CONS

The lifting range is relatively modest.

OUR VERDICT

This model boasts incredibly light weight and small size, offering reliable operation to boot. It has pretty good max load, a respectable lifting range, and an affordable price, all the makings of a great product. A truly portable jack that you can pack up for a road trip or use in your garage.

detailed parameters
Operation

Manual

Max Load

8 000 lbs

Lifting Range

8" to 15.4"

Extras

Built-in bypass system to protect against ram over-travel, heat treated critical stress areas, 2-piece lifting handle

Weight

7.7 lbs

Warranty

3 months

PROS

The welded body and double reinforcement layers in the pump minimize the risk of oil leakage.

CONS

The paint gets scrubbed off pretty quickly, stripping the device's corrosion resistance.

OUR VERDICT

A reliable and durable jack that won't leave your wallet empty, this model is reinforced and leakage-proof. While it does lose its luster pretty quickly, looks aren't key when it comes to tools and this one is functional enough to make any complains moot. A great budget-friendly pick!

detailed parameters
Operation

Manual

Max Load

12 000 lbs

(Also available: 4 000 lbs, 8 000 lbs, 16 000 lbs, 20 000 lbs, 24 000 lbs, 60 000 lbs, 100 000 lbs)

Lifting Range

8.25" to 15.9"

Extras

Heat treated extension screw and saddle, 2-piece handle

Weight

10.6 lbs

Warranty

1 year

Torin TA92006

Bears the Load

Working on high-weight trucks is not always safe and if you want to make sure your maintenance tasks are going smoothly, you’re going to need the best bottle jack in terms of max load and safety features. With that in mind, turn to the Torin TA92006.

This compact jack might not look like much but it has an insanely high 40,000 lbs max load, enough to work on almost any vehicle comfortably. As for lifting that weight, it can be done either manually or via the pneumatic pump, especially since the air hose is 4 feet long and you should have no issues getting it to the pump.

While the lift height isn’t anything too special, it’s more than enough for comfortable maintenance on any type of car. What’s more important, though, is the safety valve, which prevents any malfunctions during pneumatic use. Couple this with the alloy-plated ram and you can rest assured that the Torin TA92006 will hold up the safety on its side. Of course, that alloy plating has its price as the jack weighs about 32 lbs, which makes moving it around kind of a chore. Luckily, a jack isn’t exactly something you carry on your errands so it’s not that big of a deal.

All things considered, we’d be lying if we said that the Torin TA92006 isn’t one of the best bottle jack models out there, both in specs and in convenience. It’s a simple tool that’s going to help with car maintenance, whether you’ve got a 5-ton vehicle or a 20-ton one.

Review of Torin TA92006 Big Red Air Hydraulic Bottle Jack (20 Ton Capacity)

Additional Info

User Manual     Manufacturer


 

Pro-Lift B-012D

Lift It High

Looking for a hydraulic jack that has a wide lifting range and won’t give out in the middle of a lengthy maintenance session? If you said yes, the Pro-Lift B-012D is an excellent choice!

This jack has a reinforced ram with special fortification in spots where most of the weight is supported. That way the whole system is protected and you also have a bypass system to boot, which keeps the ram from over-travel.

Couple that with the 24,000 lbs max load and the lifting range of 9.5 to 18.9 inches and you already have a pretty good model. However, we do have to admit that there are a few shortcomings. For example, this jack doesn’t have a pneumatic pump so you’ll have to raise it up by hand, which might get pretty tiring. Still, the handle is pretty convenient and makes things a bit easier although it would be nice to have it be a bit longer. Right now it can be a bit hard to reach from time to time, mostly when you’re dealing with a particularly large vehicle. Also, this model is pretty lightweight for a tool this powerful at just a bit over 17 lbs.

So if you want a reliable and durable jack that’s going to be comfortable in use, the Pro-Lift B-012D is a pretty well-rounded choice. It could use a few improvements but it’s great as is.

Review of Pro-Lift B-012D Grey Hydraulic Bottle Jack (12 Ton Capacity)

 

Alltrade 640912

Stable Quality for All

A good hydraulic jack should offer stability so that you can do your work in a safe and comfortable environment. With that in mind, we recommend the Alltrade 640912, fitted with an extra-large foundation. This guarantees more even weight distribution and steady positioning so you can rest assured that the work will be safe and hassle-free.

The Alltrade 640912 is, of course, non-skid so it won’t slide around the garage even if you put the 6000-lb max load onto it. That’s not as much as some of the more expensive models support but it’s a good level for the price. Besides, you get an excellent lift range between 11.5 and 21.5 inches, allowing for comfortable work on the vehicle.

However, there is a small shortcoming in the Alltrade 640912, namely in its design. You see, this model is manual control only and the release valve isn’t exactly in a good spot. If you’ve got your hands full with tools and parts, it may be tough to operate the jack.

But minor flaws aren’t enough to bring down an excellent product and that’s exactly what the Alltrade 640912 is. Boasting excellent stability, pretty good max load, and a convenient lifting range, this is a tool that will find everyday use in any car lover’s garage.

Review of Alltrade 640912 All-In-One Bottle Jack with Jack Stand (3-Ton Capacity)

 

Pro-Lift B-004D

Helper on the Road

Getting car problems on the road can be a real pain if you’re not ready for them. However, it’d be insane of us to recommend you carry around a 30-pound jack “just in case”. Luckily, you can choose the Pro-Lift B-004D instead, which is easy to keep in your trunk and use for any emergencies.

This lightweight 7-pound jack is designed for passenger vehicles and thus supports 8,000 lbs, maybe not exactly the highest load but still enough for a regular car. Besides, the areas that will likely bear most of the load are heat-treated and thus reinforced to withstand more weight. With that, you know for sure that there will be no unfortunate accidents during maintenance.

Plus, the ram itself glides smoothly out of the jack even though its movement is controlled manually. The top has a steel lifting saddle that cradles the vehicle and prevents it from sliding off or pushing the jack out.

Last but not least, we were pretty impressed by the 8 to 15.4 inches lifting range. It’s not the highest on the market but it’s surprisingly high for a portable jack. With that in mind, we wholeheartedly recommend the Pro-Lift B-004D if you’re concerned about car damage on the road. It’s a reasonably priced and reliable tool that might save you from a big headache and a ruined trip.

Review of Pro-Lift B-004D Grey Hydraulic Bottle Jack (4 Ton Capacity)

 

Torin T90603B

Working on a Budget

If reliability and ease of use are the key features you want from your car maintenance tools, the Torin T90603B is an astute choice. This model has a welded and heat-treated body with a 2-layer reinforcement in the pump. All that prevents both physical damage and leaks of hydraulic oil, ensuring the tool’s durability and extending service life.

Besides, the extra thick body can withstand higher temperatures so you can use the Torin T90603B in the range of 40°F to 105°F. This is particularly useful if you plan on welding parts of your vehicle or working in a high-temp environment.

With that kind of quality and a 12-ton max load, it’s kind of strange that the Torin T90603B is so affordable. But that may be due to the poor quality of its paint job. The paint peels off pretty fast which leads to reduced anticorrosion properties. Still, that’s nothing you can’t fix with a brush and a cheap bucket of paint from the nearest store, not exactly a dealbreaker.

While we often find the automatic models to be more efficient in use, the budget-friendly Torin T90603B is a great find and a reliable tool for any garage. It’s well-designed, durable, and has pretty high specs for a model at this price. An excellent pick for a thrifty shopper!

Review of Torin T90603B Big Red Hydraulic Bottle Jack (6 Ton Capacity)

Additional Info

User Manual     Manufacturer


 

What Is a Bottle Jack?

Sometimes vehicle maintenance requires tools that can lift a 20-ton car with ease, something that even the strongest man can’t do. For cases like that you need a bottle jack, a pneumatic instrument that helps raise heavy objects. Most of these devices are quite similar, varying largely in terms of max load, lifting range, and some extra features. The latter may include protective functions, reinforced parts, and new control options.

If we were to speak of a standard jack model, the concept is quite simple. The bottle-shaped tool has a hydraulic ram that goes upwards, lifting whatever object is on top of it. Most models are controlled via a pump though some have to be geared up by hand. Although we’re mostly focusing on them as a safe car maintenance tool, professional builders sometimes use it to lift houses and other structures. So even if you don’t plan on having a lifted truck in your backyard any time soon, consider buying one of these for any future renovations you might have.

While you’re working on your car, don’t forget to use one of the trusty OBD2 scanners and check your wheels using the tire pressure gauges. You don’t want to go out on the road in a faulty vehicle.

Other reviews
Comments
0 Comments

Your comment was successfully sent

Error! Please try again later

Publish Date: 2018-09-12 13:03:50