Product Comparison: Cooler Master MasterGel Maker Nano vs ARCTIC MX-4


Key Specs
Density
2.6 g/cm3
2.5 g/cm3
Compatibility
All materials
All materials
Viscosity
870 P
Thermal Conductivity
8.5 W/mK
What customers say about "Key Specs"
Cooler Master MasterGel Maker Nano Thermal Compound Paste
  • This is among the highest thermal conductivity available in the market.
  • It has more thermal conductivity than both mastergel and mastergel pro.
  • This thermal paste is good to use on overclocking processors.
  • Non conductive. Highest thermal conductivity.
  • It's super easy to apply. Great viscosity.
ARCTIC MX-4 Thermal Paste
  • This stuff has excellent thermal conductivity and lasts much longer than other pastes!
  • Extremely efficient heat transfer and is non-conductive.
  • Easy to apply with very good heat conductivity.
  • More easier to apply due to lower viscosity and gives good results without having to wait for it set.
  • I used the supplied paste and the temps were great, never going over 76C with all cores at 4.1GHz.
Features
Volume
0.053 oz.
0.282 oz.
Material
Ceramic
Carbon
Kit Contents
Syringe with thermal paste, Protective cap, Spreader, Cleaning kit
Syringe with thermal paste, Protective cap
What customers say about "Features"
Cooler Master MasterGel Maker Nano Thermal Compound Paste
  • It’s easy to use, non-conductive, and most importantly it works.
  • Premium quality material, It fixed my processor overheating issue.
  • Easy to apply and amazing results.
  • The compound is very easy to spread across the CPU IHS and you will get good coverage with a little patience.
  • It is easy to apply and should spread fine.
ARCTIC MX-4 Thermal Paste
  • Easy to clean off and reapply. Not electrical conductive.
  • Great product. No metals in compound.
  • The material was easy to work with.
  • Excellent material I am very satisfied.
  • Absolutely great product. Uses excellent materials.
Warranty / Certifications
Certifications
RoHS
RoHS
Other Information
Manufacturer
Other reviews